StorageWorks 70 - Hewlett Packard Storage Arrays
StorageWorks 70 features:
. 3G SAS host connectivity
. Dual Domain support with HP Smart Array P800 Controller for HP Proliant and Integrity servers (requires dual port SAS drives)(single environment only)
. Multi Initiator support with the SC44Ge Host Bus Adapter (AH303A)(HP-UX and Opten VMS on selected HP Integrity Servers) with dual port SAS drives only
. Supports twenty five 2.5 inch hot pluggable drives
. Supports HP DP SAS 3G disk drives, (36GB, 72GB, 146GB & 300GB capacities)
. Supports HP SATA 1.5G and 3G disk drives, (60GB, 1.5G, 120GBGB & 250GB capacities)
. Maximum storage capacity of 7.5TB (with twenty five 300GB 3G DP SAS), or 6.2TB (with twenty five HP SATA 3G 250GB hard drives)
. Attached to Smart Array P800, the Smart Array E500, the HP Smart Array P600, the HP Smart Array P411 or the HP Smart Array P212 Controllers for HP Proliant and Integrity Servers. (NOTE: Smart Array P411 & P212 Controllers are supported on Proliant servers only).
. Attached to HP SC44Ge Host Bus Adapter for HP-UX and Open VMs support on selected HP Integrity Servers (servers that support PCI-e cards) Supports attachment of up to three (3) dual I/O MSA70 behind a MSA2324fc (99 SFF drives for a total of 29.7TB SAS or 24.7TB SATA)(NOTE: MSA70 is NOT supported behind a MSA2312fc(LFF))Supports MS Windows 2003, Microsoft Windows 2008, Red Hat Linux, SUSE Linux, VMware, Novell NetWare, HP-UX 11iv2 and 11iv3, Open VMS 8.3 1H
. 1+1 Cascade support (behind a single SAS port)
. Supports boot from storage
. Redundant hot-plug power supplies and fans standard
. Addition of second I/O Module adds Dual Domain capability providing higher level redundancy and reliability