Proliant BL460c - Hewlett Packard BL Series Servers
Processor:
Up to two Intel Xeon 5400 Series processors
Up to two Intel Xeon 5200 Series processors
Supports up to 2 Dual-Core 3.50GHz, 1333MHz FSB-1x6MB Level 2 cache memory, and up to 2 Quad-3.33GHz 1333MHz-2x6MB Level 2 cache memory
Intel 5000P shipset supporting up to a 1333MHz Front Side Bus
Memory:
Up to 64MB of memory, supported by (8) slots of PC2-5300 Fully Buffered DIMMs at 667MHz
NOTE: 64GB of memory is supported with 80W processors and below. 64GB of memory is not supported with 120W processors.
NOTE: Up to three 16GB (2x8GB) memory option kits or 48GB of memory is supported with 120W processors
Supporting low-power memory
Advanced ECC memory support
Supporting memory interleaving (2x1); memory mirroring and online spare capacity.
Storage Controller:
Integrated HP Smart Array E200i RAID controller with 64MB cache (with optional battery-backed write-cache with an upgrade to 128MB cache in standard BTO models. Supports RAID 0,1 in standard BTO models
NOTE: Drive-less model available through CTO for customers not utilizing internal disk drives and attaching directly to SAN. Please note that this model does not replace any prior model offerings. The feature listed above is not included in the standard Drive-less configure to order model. However, all configure to order models offer optional support for small form factor (SFF) hot-plug drive bays, HP Smart Array E200i Controller (with optional battery-backed write cache), and Internal USB Connector. See Factory Integrated Model section for more information.
Internal Drive Support:
Up to 2 small form factor (SFF) SAS or SATA hot plug hard disk drives in standard BTO models
NOTE: Drive-less model now available through CTO for customers not utilizing internal disk drives and attaching directly to SAN. Please note that this model does not replace any prior model offerings. The feature listed above is not included in the standard Drive-less configure to order model. However, all configure to order models offer optional support for small form factor (SFF) hot-plug drive bays, HP Smart Array E200i Controller (with optional battery-backed write cache), and Internal USB Connector. See Factory Integrated Model section for more information.
Network Controller:
Two (2) embedded NC373i Multifunction Gigabit Server Adapters with iSCSI boot, TCP/IP offload engine, and optional accelerated iSCSI
One (1) additional embedded 10/100 network adapter dedicated to iLO 2 management
Note: The Gigabit Ethernet adapters transmit from the server at 2000 Mbps only, full duplex per port. For more information, see the "Network Controller" item in Standards Features section.
Mezzanine Support:
Two (2) additional I/O expansion slots via mezzanine card.
Supports up to two (2) mezzanine cards
Dual-Port Fibre Channel Mezzanine (4GB) options for SAN connectivity (Choice of Emulex or QLogic).
Wide variety of 10GbE and 1GbE network adapter options for additional network ports
QLogic QMH4062 Gigabit Ethernet iSCSI initiator
4X DDR InfiniBand (IB) Mezzanine (20 Gb/x) options for low latency server interconnectivity (based on Mellanox technology
Internal USB Support:
One (1) internal USB 2.0 connector for security key devices and USB drive keys in standard BTO models
NOTE: Drive-less model now available through CTO for customers not utilizing internal disk drives and attaching directly to SAN. Please note that this model does not replace any prior model offerings. The feature listed above is not included in the standard Drive-less configure to order model. Howerver, all configure to order models offer optional support for small form facotr (SFF) hot-plug drive bays, HP SMart Array E200i Controller (with optional battery-backed write cache), and Internal USB Connector. See Factory Integrated Model section for more information.
Form Factor:
HP Proliant BL460c server blade plugs vertically into the BladeSystem c7000 enclosure and horizontally into the BladeSystem c3000 enclosure.